Function
Input: impedance> 10KΩ electronically balanced input
Technical parameters:
Input: impedance> 10KΩ electronically balanced input
CMRR> 65dB (50Hz-10KHz)
Output: Impedance <60Ω, electronically balanced output
Maximum output level: Vpp = 4V balance, Vpp = 7.6V non-equilibrium
Frequency response: 20Hz-20.0kHz ± 0.5dB
Dynamic Range:> 105dB 20Hz-20kHz (not weighted)
Distortion: 0.01% (THD)
Maximum delay: 6.979mS, the minimum adjusted pace was 0.021mS
Output Gain-40dB-+6 dB adjustable, adjust the pace was 0.1dB, input gain of-40dB-+6 dB
adjustable, adjust the pace was 0.1dB.
Consider graphic equalizer wave device 15 / each input
Parametric equalization filter 8 / per output, 9 / each input
Filter gain +15 dB to-30dB, 0.1dB steps from the
Centre frequency 20Hz-20kHz, 1 / 36 octave (368 ISO frequencies)
Filter Q value / Bw value 0.5-128/2.0-0.008 (switch to high-and low-pass response)
High-pass low-pass filter: (HPF & LPF) filter for each output has a high-pass and low pass filters
Filter (high pass): 20Hz-20kHz, 1 / 36 octave (low pass) 20Hz-20kHz, 1 / 36 octave
Response curve Butterworth: 6dB, 12dB, 18dB, 24dB, 48dB, Baiser children 12dB, 18dB, 24dB, 48dB,
Linkwitz a Swedish dish: 12dB, 18dB, 24dB, 48dB
Limiter (Limiter) threshold: (Level)-10dBu-+15 dBu
Start time :0.3-90mS release time start-up time of 2 times, 4 times, 8 times, 16 times or 32 times
Display: 20 × 2 character LCD blue backlight white
Input level instructions:-24dB,-18dB,-12dB,-6dB, 0dB, Clip
Output level instruction:-24dB,-18dB,-12dB,-6dB, 0dB, Clip
Connection: Input XLR-3F Output XLR-3M RS232 9 pin female serial Block: USB USB Block Square
Power: Input power supply 180V-240VAC 50Hz-60Hz Insurance no: T315mA/250VAC